Home
Decorative Lamp

Night Lamp Decoration

Night lamp decoration, Unique wooden lamp

 

Night Lamp Decoration

Creating a laser-cut decorative lamp is a rewarding project that combines creativity and precision. In this guide, we'll walk you through the steps to create a lamp similar to the one shown in the image using a 3mm MDF board and a small LED candle for lighting.

Materials Needed:

  1. 3mm MDF board
  2. Laser cutting machine
  3. Design software (such as Adobe Illustrator, CorelDRAW, or Inkscape)
  4. Sandpaper (optional)
  5. Wood glue
  6. Small LED candle
  7. Transparant paper

Tools Needed:

  1. Laser cutting machine
  2. Computer with design software
  3. Clamps (optional, for holding pieces together while glue dries)

Step-by-Step Instructions

Step 1: Design the Lamp

  1. Sketch Your Design: Plan the design you want on the sides of your lamp. This design features a tree and mountain scene.
  2. Create Vector Files: Use design software to create vector files of your design. Each panel of the lamp will need to be drawn out. Ensure that the panels fit together with interlocking tabs.
  3. Include Ventilation Holes: Make sure to include ventilation holes in the design to allow heat from the LED candle to escape.

Step 2: Prepare the MDF Board

  1. Measure and Cut: Measure your MDF board to ensure it fits your laser cutting machine.
  2. Secure the Board: Place the MDF board on the laser cutting bed, securing it as necessary to prevent movement during cutting.

Step 3: Laser Cutting

  1. Set Up the Laser Cutter: Import your design files into the laser cutter’s software. Adjust the settings for 3mm MDF (typically around 100-150mm/s speed and 70-100% power, but this varies by machine).
  2. Cut the Panels: Send the design to the laser cutter and begin cutting. Monitor the process to ensure everything cuts correctly.
  3. Remove the Pieces: Once the cutting is complete, carefully remove the pieces from the laser cutter.

Laser GRBL Setting:

  • Parameters : Brightness 90, Contrast 110, White Clip 0
  • Conversation tool : Vectorize
  • Don't forget to click the auto trim image
  • Image size and position : 279.0mm x 195.0mm
  • Speed and laser power options depend on your own laser cutting model. 

Step 4: Assemble the Lamp

  1. Sand Edges (Optional): Lightly sand the edges of the cut pieces if there are any rough spots.
  2. Glue the Panels: Begin assembling the lamp by gluing the panels together. Apply wood glue to the tabs and slots, then fit the pieces together.
  3. Use Clamps (Optional): Use clamps to hold the pieces together while the glue dries to ensure a strong bond.

Step 5: Install the LED Candle

  1. Prepare the Base: Ensure the base has a hole or opening to insert and remove the LED candle easily.
  2. Place the LED Candle: Insert the LED candle into the base of the lamp. If desired, place a green acrylic sheet inside the lamp to create a green lighting effect.

Step 6: Final Touches

  1. Check Stability: Ensure that the lamp stands stable and all pieces are securely glued.
  2. Turn on the LED Candle: Turn on the LED candle and place the lamp in your desired location. Enjoy the warm, decorative light!

Tips:

  • Design Software: If you're new to design software, there are plenty of tutorials available online for Adobe Illustrator, CorelDRAW, and Inkscape.
  • Laser Cutter Settings: Always perform a test cut on scrap material to ensure your settings are correct before cutting your final pieces.
  • Safety: Always follow safety guidelines for operating a laser cutter, including wearing appropriate eye protection and ensuring proper ventilation.

By following these steps, you'll create a beautiful, laser-cut decorative lamp that can add a touch of personalized charm to any space. Enjoy your crafting!